08-01-2019, 15:12
Witam. Mam pytane. Czy ktoś podpinał już dysk np 2,5 prze port USB3.0. Mam ustawione aby nie usypiać dysku i ne parkować a mimo wszystko dysk jest usypiany .
(08-01-2019 15:12)z.sproski napisał(a): [ -> ]Witam. Mam pytane. Czy ktoś podpinał już dysk np 2,5 prze port USB3.0. Mam ustawione aby nie usypiać dysku i ne parkować a mimo wszystko dysk jest usypiany .
/opt/home/admin # smartctl -a /dev/sda
smartctl 6.6 2017-11-05 r4594 [mips-linux-3.4.113] (localbuild)
Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Device Model: ST1000LM035-1RK172
Serial Number: XXXXXXXXX
LU WWN Device Id: 5 000c50 0ab5ddae3
Firmware Version: SBM3
User Capacity: 1,000,204,886,016 bytes [1.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jan 11 13:41:16 2019 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x71) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 163) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x3035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 084 064 006 Pre-fail Always - 240814022
3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 685
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 071 060 045 Pre-fail Always - 11245283
9 Power_On_Hours 0x0032 091 091 000 Old_age Always - 8752 (76 119 0)
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 164
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 070 048 040 Old_age Always - 30 (Min/Max 26/41)
191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 1
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 19
193 Load_Cycle_Count 0x0032 086 086 000 Old_age Always - 28255
194 Temperature_Celsius 0x0022 030 052 000 Old_age Always - 30 (0 16 0 0 0)
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 317 (216 11 0)
241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 3360489628
242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 9102356922
254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8440 -
# 2 Short offline Completed without error 00% 6394 -
# 3 Extended offline Completed without error 00% 4679 -
# 4 Short offline Completed without error 00% 95 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 685
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 8440 -
# 2 Short offline Completed without error 00% 6394 -
# 3 Extended offline Completed without error 00% 4679 -
# 4 Short offline Completed without error 00% 95 -
_moi_ napisał(a):wg. ciebie ile taki dysk może jeszcze pociągnąć bez awarii? rozumiem że to wróżenie ale może jest jakiś przelicznik ?Dokładnie to wróżenie z fusów technologia się bezustannie zmienia, a gęstość upakowania danych rośnie
grzech1991 napisał(a):- temperatura (to co napisał szopen), ale nigdy się nie odbiłem z żadnymi testami. Ale też nigdy nie szukałemkiedyś nawet integratorzy rozwiązań IT nie wiedzieli o tym, że temperatura jest zabójcza ;D ale jest…
jakubd napisał(a):Ta ekipa dzieli się statystykami padliwości różnych modeli dysków w różnych warunkach (datacenter):tak, tylko że oni nie widzą korelacji przy temperaturach 14°C-38°C, przy czym zdecydowana większość z nich pracowała w warunkach idealnych (16°C-30°C)
(11-01-2019 23:08)z.sproski napisał(a): [ -> ]Próbowałem zainstalować sobie smarta dla dysku ale coś mi nie wychodziło. Czy gdzieś jest to ładnie opisane . Byłbym wdzięczny
Wysłane z mojego C1-U02 przy użyciu Tapatalka
opkg update
opkg install smartmontools